Haier MRV II AV48NMVERA, Руководство для стартапов

Страница: 30 / 40

GRUPAd.o.o.
30
Remote controller
1.TEMP Setting Button
(Used to set temperature. Setting ranges:
16 C to 30 C)
2.SWING Button
If you press this button once, auto swing will be
activated.
If you press this button again, the louver will fix
in the present position.
3.Power ON/OFF Button
Used for unit start and stop
After power on, the LCD of remote controller will
display the previous operation state (except for
TIMER,SLEEP and SWING state).
4.Operation MODE
Used to select operation mode.
Every time you press MODE button, operation
mode changes according to following sequence:
The function of code B
6.CLOCK Button
Used to set correct time.
7.TIMER Button
Used to select TIMER mode:TIMER ON,TIMER
OFF.
(Note: if time of TIMER ON is the same as TIMER
OFF)
10.RESET Button
Press this button by using a sharp article to resume the
correct operation of the remote controller in case
of need, i.e. for example in case of malfunctions
due to electromagnetic disturbance.
13.HOUR Adjustment
Used to set clock and timer setting
8. FILTER Button
Used to set up/down function of filter.
9.CODE Button
Used to select Code A or B, this manual is for code B.
14.HIGH/SO Button
Used to select HIGH or SOFT operation.
11.LIGHT Button
Used to light the control panel (only for cabinet unit)
12.LOCK Button
Used to lock operation button and LCD display contents:
by pressing this button, other buttons comes out of
function and lock state display appears; if you press
it again, lock state will be no more active and lock state
display will disappear.
HEAT
COOL DRY
FRESH
HIGH/SO TIMER
SET
FILTER
BA
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
SWING
MODE
CLOCK
CODE LIGHT
OFF
A
U
TO
25
26
21
23
13
17
15
18
19
22
24
27
20
14
16
12
11
36
1
2
3
4
6
7
9
10
5
8
34
33
28
32
31
30
35
29
15.SET Button
Used to confirm TIMER and CLOCK settings when
or cooling/heating
16.FRESH Button
Used to set fresh mode, the unit will draw in fresh air.
22.TEMPERATURE Display
20.TIMER Display
21.FILTER Display
17.SLEEP Button
(The clock must be corrected before setting sleep function)
Used to set sleep mode.
18.FAN Button
Used to select fan speed:LOW,MID,HIGH,AUTO.
19.TIMER OFF Display
When the filter need be cleaned, the sign will
appear automatically.
24.HIGN/SO Run Display
23.AUTO SWING Display
HEAT
26.SIGNAL SENDING Display
28.Fresh Display
25.Code A display
27.Code B display
5.HEALTH Button