unpaCKing your appLianCE
Remove all packing materials, including the foam base and all adhesive tape holding
the washer accessories inside and outside.
notE: Small amounts of water may be found inside the packaging and inside the
washer. This is normal and is the result of water tests performed at the factory.
rEmoVE transportation BoLts
notE: The transportation bolts must be removed before using the washing
machine. Three transportation bolts are installed by the factory to
prevent damage to the wash system that can occur from shock during
transportation.
Eng
Lis
H
C
H
1. Remove the
back plate of the
washing machine
by removing the
three screws that
hold it in place.
3. Make sure to
remove the
rubber spacers
inside the unit
before replacing
the back plate.
2. Remove the
transportation
bolts and the
transportation
bracket.
4. Reinstall the
back plate.
10
To avoid danger of suffocation, keep plastic bag and other packing materials
away from babies and children. Do not use this bag in cribs, carriages and
playpens. The plastic bag could block nose and mouth and prevent breathing.
This bag is not a toy.
Warning
notE: Save all transportation parts for future use. All parts should be
reinstalled before transporting the washing machine.
transportation bolts
transportation bracket
