Haier HW80-B14979, Руководство пользователя, Страница: 26 / 32

10-Installation
EN
26
10.5 Aligning the appliance
Adjust all feet (Fig. 10-7) to achieve a complete
level position. This will minimize vibrations and thus
noise during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment. Floor
should be as stable and fl at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
2. Remove the 10 screws (R1 - R10) from lower back
reinforcement. take out reinforcements (S1 and
S2) from the machine.*HW100/120-B14979
Remove the 4 screws (R1 - R4) from lower back
reinforcement. take out reinforcements (S2) from
the machine.*HW80-B14979 (Fig. 10-4).
3. Pull out the 2 iron bars I1 and I2 (Fig. 10-5)
4. Fill the 6 left holes with blanking plugs (Fig. 10-6).
10-5
Note: Keep in safe place
Keep the transportation bolts in a safe place for later use. Whenever the appliance is to
be moved at fi rst reinstall the bolts.
S2
R1-R 4
S1
R5-R10
I1 I2
10-7
10-4
10-6