Haier HW80-B14979, Руководство пользователя, Страница: 22 / 32

9-Troubleshooting
EN
22
9.2 Troubleshooting with display code
Problem Cause Solution
CLR FLTR
• Drainage error, water is not fully drained
within 6 minutes. • Clean pump fi lter.
• Check drain hose installation.
 • Lock error • Shut the door properly.

• Water level not reached after 12 minutes.
• Drain hose is self-syphoning.
• Make sure that tap is fully opened and water
pressure is normal.
• Check drain hose installation.

• Water protective level error. • Contact the After sales service.
 • Temperature sensor error. • Contact the After sales service.
Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
▶
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
 :  The remaining wash cycle time will be 1 hour and 25 minutes
 :  The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
AUTO
Automatic load detection is working; only in some programmes.
 The washing cycle is fi nished. The appliance shuts off automatically.
 Door is closed because of high water level, high water temperature or spinning cycle.
  The buzzer is deactivated
  The buzzer is activated
 The function keys is closed.The programme changing is invalid.