Haier HW80-B14979, Руководство пользователя, Страница: 19 / 32

EN
8-Care and cleaning
19
8.1 Cleaning the detergent drawer
Take always care there are no detergent residues.
Clean the drawer regularly (Fig. 8-1):
1. Pull out the drawer until it stops.
2. Press the release button and remove the drawer.
3. Flush the drawer with water until it is clean and
insert the drawer back in the appliance.
8.2 Cleaning the machine
▶
Unplug the machine during cleaning and mainte-
nance.
▶
Use a soft cloth with soap liquid to clean the ma-
chine case (Fig. 8-2) and rubber components.
▶
Do not use organic chemicals or corrosive sol-
vents.
8.3 Water inlet valve and inlet valve fi lter
To prevent blockage of water supply by solid substanc-
es like lime clean regularly the inlet valve fi lter.
▶
Unplug the power cord and turn off the water
supply.
▶
Unscrew the water inlet hose at the back (Fig.
8-3) of the appliance as well as on the tap.
▶
Flush the fi lters with water and a brush (Fig. 8-4).
▶
Insert the fi lter and install the inlet hose.
8.4 Cleaning the drum
▶
Remove accidentally washed items, especially met-
al parts such as pins, coins, etc. from the drum (Fig.
8-5) because they cause rust stains and damage.
▶
Use a non-chloride cleaner for removing rust
stains. Observe the warning hints of the cleaning
agent manufacturer.
▶
Do not use any hard objects or steel wool for
cleaning.
8-1
2
1
8-2
Stain removal
Dry Level Delay
i-Refresh Extra Rinse Speed
Temp .
Spin
Smart Cotton Synthetics Wool
Dry Fast
Wash and Dry
Mix Babycare
Duvet
Eco 40-60 Express 15
Delicate
Taches
Séchage Fin différée
i-Refresh Rinçage + Essorage
Temp .
Essorage
Coton Synthétique Laine Séchage
Rapide
Lavage et
séchage
Mixte Bébé Coton
Couette
Eco 40-60 Coton 20
Délicat
Express
15 min
i-REFRESH
525 DRUM
3-Control panel
EN
Note : Acoustic signal
In following cases, an acoustic signal is no sounds by default:
▶
when pressing a button
▶ when turning the programmes selector
▶
▶
at the end of programme
The acoustic signal can be selected if necessary ; see DAILY USE(see P17 6.13).
1 “Power” button
2 Programme selector 3 Display
3.1 ”Power” button
3.2 Programme selector
3.3 Display
Touch this button (Fig. 3-2) gently to switch on, the
display is shining, the indicator of the “Start/Pause”
button is flashing. Press it again for about 2 seconds
to switch
By turning the knob (Fig. 3-3) one of 14 programmes
can be selected, related LED will light up, its default
settings will be displayed.
The display (Fig. 3-4) shows following information:
Washing time
▶ End time delay
▶ Error codes and service information
activated after a while machine will shut down auto-
matically.
Detergent /Softener drawer 4
5 Function buttons
6 “Start/Pause“ button
3-2
3-3
3-4
Stain removal
Delay
Steam Extra Rinse Speed
Temp .
Stain removal Steam
Temp.
Speed Extra Rins e
REFRESH 525 DRUM
8-5
8-3 8-4