Haier HW70-IM12826TNZP, Руководство пользователя

Страница: 24 / 32

9.1 Preparation
Take the appliance out of the packaging.
Remove all pack
●
aging material including polystyrene base, keep them out of childrens
reach. While opening the package, water drops may be seen on plastic bag and port-
hole. This normal phenomenon results from water tests in the factory.
9.2 Dismantle the transportation bolts
The transportation
●
bolts are designed for clamping
anti-vibration components inside the appliance during
transportation to prevent inner damage.
1. Remove the back cover (Fig. 9-1).
2. Remove all 4 bolts on the rear side and take out
plastic spacers (A) from inner side of the machine
(Fig. 9-2).
3. Replace back c
●
over by inserting it in the two gaps
its convexity is f
●
acing out (Fig. 9-3).
4. Fill left holes with blanking plugs
●
(Fig. 9-4) .
9-2
3
A
9-1
9-3 9-4
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environmen-
tally friendly manner.
Note: Keep in safe place
Keep the transportation bolts in a safe place for later use. Whenever the appliance is to
GB
9-Installation
24
1. Paste the felt
2.Put down the machine backwards, remove the four adjustable feet
3.Put on the cover. then install the feet which go across