10- Installation
GB
After the change of the door check that the door seals
are located properly on the housing and all screws are
tightened well.
12. Take out the new lower hinge of upper door from
the accessory bag and screw it to the left side of
the appliance.
13. Lift the upper door carefully on to the lower hinge
so that the pivot fits into the hinge barrel.
12.
13.
14. Take out the upper hinge from the accessory
bag. Put the connection cable through the up-
per hinge and fix the upper hinge with the three
screws on left side of appliance.
15 Put the hinge cover (delivered in the accessory
bag) over the hinge.
16
. Plug in the connection cable and fit it into the
opening.
17. Replace front panel and fix it with the five screws.
1
8 Take out the cover from the accessory bag and fix
it to the right side of upper door.
14.
17.
16.
18.
32
Next steps (a-h) are only necessary for models with
two doors:
a Remove lower door
b This step needs two persons; one who holds the
appliance in place and one who carries out the as-
sembly steps!
Tilt the appliance slightly backwards and remove
the lower hinge with the feet (1). Change also po-
sition of the other feet (2).
c Unscrew the two grub screws (1), remove the low-
er hinge, rotates through 180° (2) and
d refix the lower hinge with the 2 grub screws
e Screw the lower hinge to the left side of the appliance.
f Follow steps 8 and 9.
g Lift the lower door carefully on to the lower hinge
so that the pivot fits into the hinge barrel.
h
Take out the new hinge from the accessory bag
and screw it to the left side of the appliance.
h
g
e
a
b
c
d
f
= 8. + 9.
Be sure the pivot fits into the hinge barrel of lo
-
wer door.
Be sure the pivot fits into the hinge barrel of lo
-
wer door.
