Universal Remote Control
EN-27
Haier LED HDTV
Video.
Press
C
5
/
6
/
3
/
4
button to select desired video
folder, and then press
ENTER
button to enter the
play interface.
1. Play Time
4. Shuffle On or Off
2. File Name
5. Audio Only
3. Repeat
6. Information
Press
D
MENU
button to display the option list.
1. Play/Pause
4. Picture Mode
2. Repeat
5. Screen Mode
3. Show Info
Press the button on the remote control to select the
E
adjusted item, press
ENTER
button to confirm.
PLAY/PAUSE
REV
REPEAT
STOP
USB
REC
PREV
NEXT
6
7
3
5
4
1
2
1. Play or pause
2 Stop
3. Fast reverse
4. Repeat
5. Fast forward
6. Play previous music
7. Play next music
Press
F
EXIT
button to return to the previous menu.
Press
USB
button to exit the USB mode.
Note
Do not remove USB device from the TV until
R
you have exited the USB mode otherwise you
may damage the USB device.
Universal Remote Control
Setting Up Your Remote Control
After it has been set up properly, your remote control
can operate in six different modes: TV, DVD, VCR,
SETBOX, CABLE or AUDIO.
Note
The remote control might not be compatible
R
with all DVD Players, VCRs and Cable boxes.
Control Operation
Program the Controller to work with your device.
A
Changing device mode by pressing the TV
B
, DVD, STB,
CABLE, VCR, AUD key. When device is set, related
device LED will be on for 1 second and then be off.
Aim the remote at the device.
C
Use the other Controller buttons to operate the
D
device. Device LED will blink if user presses any key
(if the key has data in current mode.). If the key has
no data, then LED will not blink.
Default init status: TV/Haier codeset.
E
Manually Programming the Control
Y
Check the code no. from the code list.
Choose the device you want to program.
A
While Press and holding
B
ENTER
key, press
INPUT
key, and device LED will be ON. Keep the status for
about 3 seconds and the LED will blink, indicating
that the Controller is ready for programming, then
release both keys.
Led will blink once when you enter a digit key,
C
indicating the digit key is programmed. If 3 digits are
programmed successfully, device LED will be ON for
about 3 seconds and then blink twice per second.
Then User now can:
Try to operate the device by using power key.
A)
If operation can be done, press
B)
ENTER
key to
save current 3-digits code brand to EEPROM and
exiting manually programming mode.
Return to beginning of step 3. Reprogram the
C)
control.
Содержание HL40XSL2a
Страница 39: ...Warranty Haier LED HDTV EN 38 ...