CLEANING AND MAINTENANCE
11
We recommend following ‘Cleaning and maintenance’ instructions for safety and optimal
performance of your range hood.
Preparation for cleaning and maintenance
● Be sure to unplug the power cord before commencing cleaning or servicing of the range hood.
● Always wear rubber gloves during cleaning and maintenance to guard against injury from sharp
metal parts.
● Always handle removed parts carefully to avoid damaging them.
● Clean and service your range hood regularly, depending on the frequency of use.
Cleaning the main housing (daily)
● The outer surface of the range hood and filter should be wiped every day after use.
● To protect the stainless steel finish, use a neutral detergent and a soft cloth. Never use hard
brushes.
● Never wipe surfaces with corrosive chemicals such as gasoline or alcohol, or abrasivecleaning
agents.
Cleaning the oil collector (as necessary)
● When the oil collector is almost full,it should be removed promptly to avoid overflow.
● Pull the oil collector straight out to detach it from the filter.
● Empty the oil collector.
● The oil collector should be washed in warm water with detergent (do not use corrosive chemicals).
● To replace the oil collector, slide it into the slot and ensure it is pushed all the way in.
chimney
filter
lower glass panel
control glass panel
oil collector
Fig.9
