OPERATING INSTRUCTIONS - CONTROL PANEL
10
HEAT AUTO-CLEAN
A unique "Heat Auto-Clean" function has been provided in this range hood. This range hood
comes with an oil collector. During cooking, the oil and dirt may go into the oil collector.
Over the time,some stubborn grease and oil can get stuck inside the range hood.
This unique function was designed to eliminate the stubborn grease ane oil and keep the range
hood clean.
Please first touch" "button, then touch" "button on the panel. The light of auto clean will
start blinking. After preheating for 9 minutes, the low speed indicating light " " is on at the same
time.The motor will start working automatically for 1minute. Once auto-clean function stops
working, the cooker hood system will switch to stand-by mode. To avoid any bad influence for
cleaning performance, please do not cook during the auto clean process.
All the grease are melt and goes into the inside oil outlet pipe, then drops into oil collector. The
auto-clean function will stop operating at the end of 1 minute. Wait for a moment and then carefully
remove the oil collector, make sure that you do not spill the grease. Pull the grease into a sink and
clean the oil collector with a soft cloth. Install the oil collector back in place. Your range hood is
clean as new from inside now.
