background image

1    

Read all instructions before using this dryer.

2   The interior of the dryer 

should be cleaned periodically by qualified service   

       personnel. An excessive amount of lint build up in 

the interior of the dryer 

could 

       result in inefficient drying and pose a possible fire hazard. 

       

  3

The appliance must not be installed behind a lockable door, a sliding door or a door with

a hinge on the opposite side to that of the tumble dryer in such a way that a full opening

of the tumble dryer is restricted.

  4 Attention - rear panel can be hot.

  5

The tumble dryer should not be used if industrial chemicals have been used to

  6   The dryer must only be used for its intended purpose.

  7 Clean lint screen before or after each load.

  8   This appliance is not intended for use by people (including children) with reduced

        physical, sensory or mental capabilities, or lack of experience and knowledge,

       unless they have been given supervision or instruction concerning use of the

       appliance by a person responsible for their safety. Young children should be

 

       supervised to ensure that they do not play with the appliance.

  9  Do not operate the dryer if any parts are missing or broken.

10  To avoid fire hazard or electrical shock do not use an adaptor plug or extension 

       cord or remove grounding prong from electrical power cord. Failure to follow this 

      warning can cause serious injury, fire or death.

11  To avoid fire hazard or electrical shock do not reach into the drum while the drum is 

12  Do not attempt to modify or repair the controls.

13  The final part of a tumble dryer cycle occurs without heat (cool down cycle) to cool

       items to a temperature that ensures that they will not be damaged. Never stop a

       tumble dryer before the end of the drying cycle unless all items are quickly removed

       and spread out so that the heat is dissipated.

14   Do not dry items that have been previously cleaned in, washed in, soaked in, or

       spotted with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot

       removers, turpentine,waxes and wax removers, etc. Do not store or use these items

       on or in the vicinity of the dryer. Do not place items exposed to cooking oils in your

       dryer. Items contaminated with cooking oils may contribute to a chemical reaction that

       could cause a load to catch fire. Oil-affected items can ignite spontaneously, especially

      when exposed to heat sources such as in a tumble dryer. The items become warm,

      causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot 

      escape, the items can become hot enough to catch fire. Piling, stacking or storing

       oil-affected items can prevent heat from escaping and create a fire hazard. If it is

       unavoidable that fabrics that contain vegetable or cooking oil or have been

       contaminated by hair care products be placed in a tumble dryer they should first be 

       washed in hot water with extra detergent - this will reduce, but not eliminate, the

       hazard.

moving. Wait until the dryer has stopped completely before reaching into the drum.

1

       clean the dryer.

Содержание HDY-E60

















Отзывы: