INSTALLATION INSTRUCTIONS
5. With assistance, mount dryer on wall brackets. See Fig.4.
6. A second control panel with inverted symbols is supplied. Peel the
release paper from the back of inverted film then place new control
panel film on the surface so that the writing is the correct way around.
11
Fig.4
Caution
：
Plug must be accessble after installation.
Stacking installation
You can use a stacking kit (included as an accessory) if you want to mount your dryer
on the top of a Haier front load washing machine, ensure the washer is the same
width as the dryer.
1. Remove 4 screws among screws on the bottom panel (see fig.1), and install the
stacking kit on the bottom panel (see fig.2).
4 Screws
stacking kit
Fig.1
Fig.2
7. Press the Start/Pause button and hold it in the pressed position, and at
the same time, turn the program dial knob from the OFF position to any
other program, until the inversion is displayed.
