English
20
• It is recommended to keep some space between foods for good cold air
circulation. The temperatures in the refrigerator are slightly warmer near the top
and colder near the base.
Change the fresh food light bulbs
The voltage and wattage of the fresh food bulbs are: 115volt, 60 Hz –
40W. (Never use bulbs with power over 40W.) The lamp holder is type E17
intermediate size.
When changing the light bulbs:
• Pull out the power cord plug from the wall outlet, cutting off the power.
1. Remove the screw securing the light shield.
2. Use your hands to press down at the back of the light-shield, releasing
two tabs.
3. Hold the light-shield and pull it out.
• Turn the bulb in a counterclockwise direction, and put in a new bulb by turning
it clockwise.
• Re-install the light-shield back in the tabs in the reverse order, and snap back in
place.
Removing and Installing air Curtain (only for servicing if
needed)
1. Remove the water filter.
2. Take off the fresh food light-shield, and unscrew the bulb.
3. Remove the screws of the air curtain frame, using a screwdriver.
4. Take down the fresh food air curtain, using your hands to press down
on the air curtain with a little bit of pressure.
• Re-install the air curtain by following these steps in the reverse order.
fooD stoRaGe tIPs (Cont'D)