Operation Method
2)
Prompt Heating Type
For saving waiting time of your bath, increasing heating speed of water heater, and enlarging outlet of hot water of
water heater, it is suggested that you select prompt heating mode to use this unit according to the following way in
different seasons:
z
Operation in summer: Because the water temperature of tap water in summer is relatively higher (around
28
℃
). During the bathing period, you can directly select the prompt heating mode to heat the water, which
will save time while saving energy.
z
Operation in spring, autumn and winter: During these three seasons, the temperature of tap water is relatively
lower, while the demand of hot water is relative higher during the bathing process, you can adjust the water
heater to “medium-temperature heat preservation” of “water storage type” or “preservation” mode to preheat
water. When the temperature of hot water is at a range of 35
℃～
40
℃
, you can use the “prompt/storage”
button to adjust the working mode of this unit to prompt heating mode to take your bath, thusly meeting your
demand of hot water while greatly shortening waiting time of your bath.
In addition, when there are many people to take bath, you also can adjust the water heater to “water storage
type” mode to preheat water, and then start the prompt heating mode to take a bath.
z
Note: At the initial stage after the startup of prompt heating mode (the first 1
～
2min), the temperature of
outlet water will have minor variations. Please firstly adjust the water to the proper temperature and then take
bath in order to ensure the comfortableness of your bath.
Conversion Method of Prompt Heating Mode
Under any water storage type of startup status, press the “prompt/storage” button to enter prompt heating mode,
“prompt heating type” will be illuminated, the time will count down with the limitation of 30 minutes, and the
display panel will indicate the decrease in the range of 30:00
～
00:00. If the system detects that the water flow is
greater than or equal to 2L/min, this unit will execute heating in the implied power of 3000W, and the “heating”
symbol will be illuminated. Within the working time period of prompt heating (30min), if the system hasn’t
detected water flow (e.g., the outlet valve is closed) or if the water flow is less than 2L/min, the working of the
heating tube shall be immediately stopped, and this unit will be under heat preservation status, the “heat
preservation” symbol will be illuminated, the count-down will continue. After the finish of the count down, it will
return to the previous working status (some water storage type prior to entrance of prompt heating mode. You can
use the “prompt/storage” button to re-enter into prompt heating mode.
3.
Temperature Setting
Under status of startup (the display screen has no any digital flashing indication), press
∧
or
∨
to enter
temperature setting status to set the temperature (digital readout flashing quickly). The temperature value is
varied within the range of 35
～
75
℃
with intervals of 5
℃
. Under standard mode, you can directly use
∧
or
∨
to adjust and set temperature; and under medium-temperature heat preservation mode, the implied
maximum heating temperature of this unit is 40
℃
, which can’t be adjusted.
4.
Correcting the Clock
The clock is a twenty-four hour system, 60 minutes, and the second digit will be indicated flashing and the
second digital will travel.
11
Prompt Heating Type
Actual
Heating
(Fig. 9)
