Haier ES8V-Q1(EU), Инструкция по эксплуатации

Страница: 9 / 112

9
Precautions for use
Use
Operational Method
For the first using after installation, the water inlet valve of tap water should be
opened firstly since there is not water in the inner pot, and turn off the valve
after the inner pot is water filled and water comes out continuously from the
water outlet.
Check each connection for leakage. Turn on the power (If power switch is
installed on the machine, it needs to be closed off) and the heating indicator
lights up, and the electric water heater starts heating. Turn the knob according
to the heated water temperature required. Heating temperature can be
selected steplessly through the knob mark from the water inlet temperature to
75
o C in an low to high order, and the indicator will light up in the heating
condition.
The heater controls temperature automatically. It will cut off power supply
when the temperature reaches the setting value. When the water temperature
decreased to a certain value, the red indicator will light up again and continue
heating. Such circulation will ensure hot water supply at any time.
During normal heating, a small amount of water may come out from the water
outlet pipe of safety valve. This is normal; if a large amount of water comes
out from the water outlet pipe of safety valve, it means the cold water pipeline
or contact our after-sales to purchase a relief valve.
Never turn on the power before the inner pot is fully filled to avoid damage to
the machine.
When using, take care to release cold water before discharging hot water to
avoid burning.
During using, check the safety valve once a month by turning the small handle
of the safety valve. If there is water comes out, it means the safety valve
works normally. If there is no water comes out, please contact your local
after-sales department.
After completion of installation, make sure to turn on the water intake valve and
mixing valve since there is no water in the inner chamber. Turn the mixing valve
to the maximum for hot water outlet.
Turn off the out-flow valve when water flows out from the sprinkler or the water
outlet (indicating that the container is filled with water). Turn off the water outlet
valve. Inspect all connections to ensure that there is not water leakage before
connecting to power.
E
n
g
lis
h