DESCRIPTION
The RC-100 is a precision digital thermostat specifically designed for
heat pumps. It has the capability of being controlled both locally and
by remote control. It offers programmability, stand alone operation,
and robust, optically isolated communications with automation
systems, utility control systems, and personal computers.
Electrical rating: 24 V; 3 A; 50/60 Hz
Maximum current: 2 A on any circuit, 3 A total
Thermostat operating current: less than 15 mA
The following requirements must be observed for installation in
Europe: CE
1. This equipment must be installed in accordance with National
wiring rules for the country in which it is installed.
2. Fuses must be replaced only with IEC rated components.
3. All product labels, instructions and markings relating to safety
must be translated to a language which is acceptable in the
country in which this equipment is to be installed.
INSTALLATION
Before installing this thermostat:
1. Read all of the installation instructions carefully.
2. Read the Owner's Manual carefully.
3. Ensure that this product is suitable for your application.
4. Ensure that wiring complies with all codes and ordinances.
5. Disconnect power to the control transformer to prevent electrical
shock and damage to equipment.
6. Select an appropriate location to ensure an accurate temperature
reading.
1
