
2
2
1.
Ensure that the thermostat is mounted 5 feet above the floor and is at least 2 feet from an outdoor wall.
2.
Ensure that the thermostat is located in an area where there is adequate air circulation.
3.
Do not mount in the path of direct sunlight or of radiant heat generated by appliances.
4.
Do not mount behind an outdoor wall, near a fireplace, or in the path of any air ducts.
Removing an existing thermostat
1.
Disconnect the power to the control transformer.
2.
Remove the cover to the existing thermostat.
3.
Disconnect the wires going to each terminal on the thermostat. Label each wire with the letter or number
at the terminal.
4.
Remove the existing plate or base from the wall.
MOUNTING
When mounting the RC-112BZ, grasp the thermostat by the sides, avoiding the keys, and unsnap the base.
Holding the base to the wall so that the word "TOP" is upright and facing you:
1.
Mark the two mounting holes on the wall using a pencil.
2.
Drill a hole using a 3/16" bit at each mounting hole marking.
3.
Install the two wall anchors supplied.
4.
Slide the system wires through the opening in the base.
5.
Mount the base to the wall using the two #6 x 1/2" self-tapping screws supplied -
See
Figure 1
.
Figure 1
Содержание OMNISTAT RC-112BZ
Страница 5: ...5 5 Figure 5...