HAI OMNISTAT RC-112BZ, Руководство по установке, Страница: 15 / 16

1
1
5
5
FCC NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
TROUBLESHOOTING TIPS
SYMPTOM ACTION TO TAKE
1. Check power to the thermostat
2. Check wiring diagrams
Thermostat Dead
3. Check thermostat temperature sensor
Thermostat will not operate with a damaged temperature sensor
SYMPTOM ACTION TO TAKE
1. Check for break in G, W, or Y wire
2. Allow minimum off time to pass
3. Check system options for correct settings
Fan, Heat, Or Cool
Inoperative
4. Remote system is overriding thermostat
"REMOTE"
is displayed when system is overriding thermostat.
SYMPTOM ACTION TO TAKE
1. Mode is Off (Select Heat, Cool, or Auto) Can't Adjust Temperature
2. Check if thermostat keys are disabled
To enable thermostat keys for test, remove jumper
SYMPTOM ACTION TO TAKE
1. Check Node ID
2. Check communications mode setting Control By Remote System
Not Working
3. Check setup of the remote system
Ensure that all setup items for the thermostat and the remote system
are set to the proper configurations for communication