HAI HI-Fi2, Руководство пользователя

Страница: 8 / 16

Page 6
Setting the Brightness
The Brightness setting allows you to increase or decrease the brightness level of the display. To change
the brightness level setting, press the
+ button to increase the brightness level and press the – button to
decrease the brightness level of the display. The brightness level can range from 1 to 5.
After modifying the Brightness setting, press and release the
src button to advance to the Initial Volume
menu item.
Initial Volume Setting
The Initial Volume setting allows you to set the starting volume level whenever the respective audio
zone is turned on. To change the initial volume setting, press the + button to increase the initial volume
setting and press the – button to decrease the initial volume setting.
To have the initial volume start at the volume that the respective audio zone was set to when it was last
turned off, set the initial volume to “0”. This essentially allows you to use the
Power button on the VSC
as a mute function to quickly silence the audio zone. Then, when the audio zone is turned back on, the
volume will resume at its previous level.
After modifying the Initial Volume setting, press and release the
src button to advance to the Page
Volume menu item.
Page Volume Setting
The Page Volume setting allows you to set the paging volume for the respective audio zone. Thus,
when the Page input is activated, Source 8 will act as the paging input source and the audio will be
transmitted at this volume setting. To change the page volume setting, press the + button to increase the
page volume setting and press the – button to decrease the page volume setting.
A setting of “0” means that the respective audio zone will be muted when the Page input is activated.
This setting must be performed at the VSC in each audio zone and is applicable to that particular zone
.
After modifying the Page Volume setting, press and release the
src button to exit the menu. The display
will revert back to the source setting.