background image

Page 9 

Source Gain Settings 

 
The Source Gain setting allows you to increase the volume of each audio source so that all sources are at 
the same relative volume. 
 
To change the source gain setting, press the + button to increase the volume of the respective source and 
press the – button to decrease the volume of the respective source.  These settings are system-wide and 
affect all zones.   
 
After modifying the source gain for all eight sources, press and release the 

src

 button to advance to the 

IR Passthrough setting. 
 

IR Passthrough 

 
The IR Passthrough setting allows you to select whether IR signals from a remote control are routed to 
the connected audio source.  When enabled, this allows you to remotely control a connected audio 
source from the respective VSC.   
 
To change the IR Passthrough setting, press the 

+

 button to enable IR passthrough and press the 

 button 

to disable IR passthrough.  This setting must be performed at the VSC in each audio zone and is 
applicable to that particular zone. 
 
After modifying the IR Passthrough setting, press and release the 

src

 button to advance to the IR 

Passthrough setting. 
 

IR  

 
The IR setting allows you to set whether the IR signals received at the VSC are sent to the Hi-Fi2 for 
processing.  When enabled, the VSC will route IR signals to the Hi-Fi2 processor whenever an IR signal 
is received at the respective VSC.  
 
To change the IR setting, press the 

+

 button to enable IR and press the 

 button to disable IR.  This 

setting must be performed at the VSC in each audio zone and is applicable to that particular zone. 
 
After modifying the IR setting, press and release the 

src

 button to exit the menu.  The display will revert 

back to the source setting. 

 

 
 

 

Содержание HI-Fi2

















Отзывы: