HAI HI-Fi2, Руководство пользователя

Страница: 13 / 16

Page 11
IR Passthrough
When IR Passthrough is enabled, IR data can also be routed to the connected source equipment. After
decoding the received IR, the Hi-Fi2 processor will then route the IR signal to the source which is
logically connected to that VSC.
IR Output
Each RIM ships with an IR flasher (Part Number: 62A08-1). The IR flasher is used for sending IR data
to the source equipment. When you point your source equipment remote control at the IR receiver in the
VSC and send a signal, the IR data is routed to the appropriate RIM (to which the source is logically
connected), which then sends the IR signal through the IR flasher to the source equipment.
IR
SOURCE EQUIPMENT
(FRONT)
IR RECEIVER
WINDOW
IR FLASHER
RIM
ir out
audio in