24
Maximizer
®
97 Owner’s Manual
OR-05/18/15
Quality Water International
®
Assembly and Parts
Bypass Valve
1
2
3
4
5
6
7
8
9
8
12
5
10
11
13
14
15
Part #
Description
Qty.
Note
1
54611
Bypass Valve Assembly
(Also includes items 2-15)
1
Makes the connection between the plumbing and the appliance.
The bypass valve assembly allows water to bypass the appliance for
service or when untreated water is desired. The recommended seal
for the 1-1/4-inch male inlet-outlet threads is the plastic bypass nut
(90251), O-Ring (90837), and 1-inch CPVC CTS adapter (90259).
Make sure the O-Ring is between the bypass valve assembly and
the flange on the cpvc adapter. The O-Ring seal areas at the main
control valve inlet and outlet must be smooth, free of defects and
debris, and lubricated with silicone grease before assembling.
When attaching to the main control valve, put the O-Rings on the
male bosses on the main control valve and push the bypass valve
assembly into place; if not, the O-Rings may be “pinched.” If the
O-Rings get pinched, replace with new ones. The bypass valve
assembly is preassembled and is not considered field-serviceable.
If the bypass valve assembly is damaged, it must be replaced with
a new assembly.
Figure 8: Bypass Valve Assembly
