HC3 Owner’s Manual
12/11/2013
7
Five-Button Controller, Cont.
Controller Part
Function
Buttons Cont.
The Change, Select, Display, and Scroll Back buttons are used when changing Customer
Settings and Service Settings.
Display
The Display button is used to enter programming modes and also to save a value and display the
next value to be changed.
1.
To program Service Settings, press and hold both the Display button and the Select
button for about five seconds while “Service Setting” is displayed.
2.
To program Customer Settings, press and hold the Display button for about five seconds
while “Customer Setting” is displayed.
Scroll Back
The Scroll Back function is used to step back to a previous parameter setting. It is typically used
to go back to correct a setting without the need to scroll forward through all settings.
Regenerate
The Regenerate button at the bottom of the controller is used when starting your water
conditioning appliance, to start an immediate regeneration, or to restore capacity if you run
out of salt.
Содержание Hydroclean HC3
Страница 43: ...Notes...