Hague Quality Water Hydroclean HC3, Руководство пользователя и инструкция по установке

Страница: 18 / 44

HC3 Owner’s Manual 12/11/2013 18
Service Settings, Cont.
Mode 1 (Timer) and Mode 2 (Demand Delayed) Setting Chart
This section provides guidance for using different service settings to achieve the desired capacity.
HC3 25* HC3 25CX** HC3 35* HC3 48* HC3 64* HC3 105*
#1 Salt Setting
Backwash 1 (minutes) 0 0 0 0 0 0
Brine/Rinse (minutes) 11 11 15 20 11 18
Backwash 2 (minutes) 10 10 10 10 10 10
Capacity–grains @ salt–lb
(grams @ salt–kg)
***
10,700 @ 2.0
(693 @ 0.9)
10,700 @ 2.0
(693 @ 0.9)
14,700 @ 2.8
(952 @ 1.3)
20,100 @ 3.8
(1302 @ 1.7)
26,800 @ 5.0
(1736 @ 2.3)
44,300 @ 8.3
(2870 @ 3.8)
#2 Salt Setting
Backwash 1 (minutes) 0 0 0 0 0 0
Brine/Rinse (minutes) 16 16 22 30 17 28
Backwash 2 (minutes) 10 10 10 10 10 10
Capacity–grains @ salt–lb
(grams @ salt–kg)
14,700 @ 3.0
(952 @ 1.4)
14,700 @ 3.0
(952 @ 1.4)
20,200 @ 4.2
(1308 @ 1.9)
27,500 @ 5.7
(1782 @ 2.6)
36,700 @ 7.6
(2378 @ 3.4)
60,600 @ 12.5
(3927 @ 5.7)
#3 Salt Setting
Backwash 1 (minutes) 0 0 0 0 0 0
Brine/Rinse (minutes) 21 21 29 40 22 37
Backwash 2 (minutes) 10 10 10 10 10 10
Capacity–grains @ salt–lb
(grams @ salt–kg)
17,800 @ 4
(1153 @ 1.8)
17,800 @ 4
(1153 @ 1.8)
24,500 @ 5.5
(1588 @ 2.5)
33,500 @ 7.5
(2171 @ 3.4)
44,600 @ 10
(2890 @ 4.5)
73,700 @ 16.5
(4776 @ 7.5)
#4 Salt Setting
Backwash 1 (minutes) 0 0 0 0 0 0
Brine/Rinse (minutes) 30 30 41 56 31 51
Backwash 2 (minutes) 10 10 10 10 10 10
Capacity–grains @ salt–lb
(grams @ salt–kg)
22,200 @ 5.6
(1439 @ 2.5)
22,200 @ 5.6
(1439 @ 2.5)
30,500 @ 7.7
(1976 @ 3.5)
41,600 @ 10.5
(2696 @ 4.8)
55,400 @ 14
(3590 @ 6.4)
91,500 @ 23.1
(5929 @ 10.5)
#5 Salt Setting
Backwash 1 (minutes) 0 0 0 0 0 0
Brine/Rinse (minutes) 64 64 88 99 67 99
Backwash 2 (minutes) 10 10 10 10 10 10
Capacity–grains @ salt–lb
(grams @ salt–kg)
25,600 @ 12
(1659 @ 5.4)
25,600 @ 12
(1659 @ 5.4)
35,200 @ 16.5
(2281 @ 7.5)
48,000 @ 22.5
(3110 @ 10.2)
64,000 @ 30
(4147 @ 13.6)
105,000 @ 49.5
(6804 @ 22.5)
* When iron is present in the water supply, regeneration frequency cannot exceed 96 hours. Additionally, a minimum salt setting of 7 lb (3.2 kg) per cubic
foot of resin is required (#4 salt setting.)
** This model is designed for use on chlorinated, municipal water supplies only. Reduces tastes, odors, chlorine, and most man-made pollutants.
*** Do not use standard 18-inch (2.5 cm) diameter brine tank with salt grid for salt settings less than 3 lb (1.4 kg).