HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]
Ceiling suspension
During the installation the lift will be lifted over your head, take suitable precautionary
measures and safety precautions.
•
Make sure that the device is disconnected from the electric power supply.
•
Mark the mounting points on the ceiling and pre-drill them.
To do this, measure these points in advance on the projector lift.
Use only the included assembly material (screws, dowels).
•
Attach the beamer lift to the ceiling at the intended mounting points.
Make sure there is enough space all around.
•
Align the beamer lift on the ceiling by using a bubble level.
If necessary, use washers (not included).
•
Tighten all screws securely.
Safety instructions
Please also note the safety information for the distance between the beamer and the screen
and the installation instructions from the beamer manufacturer. Observe the operating instruc-
tions of all devices.
Disconnect the lift from the power supply before installing it on the ceiling and place the plug in
the immediate field of vision so that you can supervise it immediately to prevent unauthorized
insertion.
Danger of impact from falling materials or tools! While you are attaching the beamer lift to the
ceiling, it might fall down. Installation with two people is recommended.
To mount the lift on the ceiling, you need a platform or a ladder for each person. A platform is
preferable to a ladder. Make sure that the platform or the ladder is secure.
Risk of electric shock! You could get an electric shock while mounting the lift to the ceiling. The
ceiling bracket may only be installed by a qualified electrician (e.g. an electrician or a craftsman
with a comparable level of training).
Arrange the lift in the room so that, if the beamer is lowered, you cannot get caught between the
lift and surrounding objects or the walls.