HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]
Please note!
Important information. Read before you start the installation.
Please read
all instructions
carefully before starting the installation.
For your own safety and to prevent damage or injury.
1.) Before starting the installation, check whether the ceiling is fully accessible and that no
wires, cables or pipes block the way.
2.)
The installer must check the load capacity of the construction,
on which the lift will be mounted, as well as the expected occurring forces.
This is a minimum requirement! Also make sure that you comply with local regulations.
3.)
Before starting, make sure that all necessary fastening materials and tools are at hand.
Only mount the projector, ceiling panel or other elements on the projector lift,
after the lift has been fully installed and tested.
The ceiling bracket must not be used for sporting activities
and might not be used as a suspension for other objects.
No additional loads may be attached to the ceiling bracket.
To prevent the projector lift from moving during installation or maintenance,
always turn off the power in the fuse box. Risk of electric shock!
Make sure that nobody is below the lift during assembly.
Falling parts or tools can cause serious injuries or even death.