Hagie STS 10, Руководство пользователя

Страница: 112 / 290

5-1
5
- D
A
SH
/ A
UT
O
SECTION 5 – HYDRAULIC SYSTEMS
HYDRAULIC SYSTEM
COMPONENTS
Hydraulic Pumps
(Mounted to the engine)
• Pressure Compensated (PC) Pump 1
• Pressure Compensated (PC) Pump 2
• Load Sense (LS) Pump
• Drive Pump
The four Hydraulic Pumps (mounted to the
engine) circulate hydraulic oil throughout the
necessary systems and back through the oil
cooler before returning it to the reservoir.
If hydraulic oil level is too low for safe
operation, a warning message will appear on the
Machine Display to alert you of low hydraulic oil
level. Press OK to acknowledge, shut down the
engine immediately, and refill reservoir to proper
level to avoid damage to the hydraulic systems.
PC Pump 1
The PC Pump 1 powers the reversible fan
motor and control valve.
PC Pump 2
The PC Pump 2 powers the high-pressure
filter, power steering, attachments, tread
adjustment valve, side-fill valve, AWS valve (if
equipped), and the pressure washer valve (if
equipped).
LS Pump
The LS Pump powers the solution pump
control valve.
Drive Pump
The Drive Pump powers the wheel motors.
Hydraulic Filtering/Cooling
Components
• Oil Cooler
• Reservoir
• Return Filter
• Pressure Filter
• Case Drain Filter
• Breather Cap
NOTICE
Operating the machine without
adequate hydraulic oil level will result in
system damage and will void the
warranty.
• Drive
Pump
• PC Pump 1 • PC Pump 2
• LS
Pump
Hydraulic Pumps
(View shown from top of machine)
Low Hydraulic Oil Level Warning Message
(Located on the Machine Display)