Hagie STS 10, Руководство пользователя

Страница: 270 / 290

SECTION 9 –
MISCELLANEOUS
9-17
hand wash valves are opened. A power
switch is located on the water pump to
manually shut the pump down in the event of
system failure (i.e. leaks, faulty pressure
switch, etc.)
NOTE: The Hand Wash System is powered
by battery power and will operate
even when the machine is off.
NOTE: Remove Hand Wash Strainer
(located near the bottom of hand
wash reservoir) and clean strainer
screen periodically to avoid dirt and
debris from entering the system.
Filling the Hand Wash Reservoir
NOTE: Hand Wash Reservoir Capacity =
4 gallons (15 L)
• Remove fill cap from the Hand Wash Fill
Port (located near the ladder) and set
aside.
• Pour fresh water down the fill port open-
ing.
NOTE: A sight gauge is located on the side
of the hand wash reservoir to visually
check water level.
• Reinstall fill cap.
Dispensing Fresh Water
To Dispense Fresh Water From Upper
Water Outlet
• Press and hold the Hand Wash Foot
Pedal (located along the lower handrail
on left-hand side of machine).
Hand Wash Reservoir
(Located beneath rear left-hand platform)
-Typical View
• Power
Switch
• In-Line
Straine
• Water
Pump
• Sight
Gauge
Hand Wash Fill Port
(Located near ladder)
-Typical View