15
OPERATING INSTRUCTIONS - FOLD
Fold the Nitrogen Toolbar into Storage position
1.
Hydrostatic handle must be in neutral position
(Figure 5)
2.
Raise attachment up off of ground for folding
procedure
*Make sure coulter units clear the ground
•
Figure 6 shows how to raise entire lift
arm with attachment pushing up on
RAISE control on hydrostatic handle
•
Figure 7
shows how to raise and lower
each toolbar arm using BOOM
controls on hydrostatic handle
o
Hold up to RAISE
o
Hold down to LOWER
Make sure to fold in toolbar tips
before folding in arms to prevent
damage being done to NTB during
folding procedure!
Before proceeding, check the area around the machine for
by-standers, overhead objects or power lines. Failure to do
so will result in serious injury or
death.
