18
ATTACHMENT SYSTEM
3. Disengage the quick attach lock assemblies.
To disengage the lock assembly, pull the pin out as far as it will go until it is in the lock-out position.
*Lock-out position prevents re-locking while attaching or detaching NTB.
Figure 17: Engaged/disengaged position for quick attach lock assembly
4. Lower the front of the machine until the hooks
are clear the machine lock pins.
-To lower the front end of the machine, turn
air-dump valve on left-front leg and lower front
airbags.
Figure 18: Airdump valve
5. Unhook the hydraulic, electrical, solution and foamer lines (if equipped), being careful not to leave the
ends in a place that they may get damaged or contaminated.
*Make sure the solution valves are OFF and engine is turned OFF before disconnecting any hoses or
electrical lines.
Figure 19: Connect electrical and solution on RH side
