6LE002957B
8. Malfunction
9. Electrical maintenance
As is the case for any other fixed electrical installation, it is important to verify the quality of the clamps at the various connection points of the installation
during the annual inspection. They must be in line with the following torques:
Number of
pulses
Type of fault
Cause
1
Charging cable fault
Defective or incompatible cable (13A)
2
Defective communication
Defective cable - short-circuit during
communication
3
Electric vehicle is overcharged
The EV does not comply with the power
limit set by the station.
4
Ventilation required
The vehicle requires additional ventilation
(the charging is blocked).
5
Fault in charge management
The load shedding is too frequent during
charging (4x) and the power supply to the
house is not sufficient.
6
Defective communication
Defective cable - problem at the diode.
Fixed
Configuration prohibited
See table above
Indicator
light
red
flashing
Circuit breaker:
2 N.m
Meter:
2 N.m
PE/L1/N:
0.8 N.m
Contactor:
0.4 N.m
PE/L1/L2/L3/N:
1.2 N.m
CP/PP:
0.4 N.m
Contactor:
3 N.m
M2 Assembly:
0.5 N.m
Assembly
M3T2S:
0.6 N.m
Tightening torques
15
