Page 25/44
Page 24/44
05-2021
hager.com
Subject to technical changes
6LE007528B
ATTENTION!
The device carries DC voltage and is designed for operation with photovoltaic
modules only!
Operation with other DC sources could destroy the device and is therefore
prohibited.
The inverter must be connected to the mains and the AC and DC voltages
switched on in the sequence stated in this instruction.
Use overvoltage protection modules
The overvoltage protection is provided by the DEHNguard overvoltage modules.
Push the DEHNguard PV500 supplied into the central overvoltage module mounting device
until it clicks into place(Figure 24).
Figure 24: DEHNguard PV500 installation
Push the four DEHNguard PV SCI 500 into the four overvoltage protection modules
mounting devices on the left and right until they click into place (Figure 25).
Figure 25: DEHNguard PV SCI 500 installation
flow
Energy storage system
