Page 15/44
05-2021
6LE007528B
Assembly on the wall
CAUTION!
2 fitters are required for assembling the energy storage system on the wall due
to its great weight.
ç
The system must be assembled on a smooth, solid and non-flammable wall. The load-bearing
capacity of the wall must be designed to hold the weight of the energy storage system (Table 5).
Energy storage system
XEM1000 / XEMV1000 / XEM2000 / XEMV2000
Weight
approx. 240 kg
Table 5: Weight of energy storage system
The weight can be used to determine a suitable fixing system by fixing system manufacturers.
The manufacturers provide helpful tools, such as an anchor finder (Table 6), for selecting the
correct anchors.
A minimum of 4 or more fixings (e.g. screw-anchor combinations or anchors) with a maximum
diameter of 8 mm (max. drillhole diameter 10 mm) must be used.
For example, an installation with four UX 10 x 60 anchors in a concrete wall with a minimum
thickness of 25 cm would result in a load-bearing capacity of 400 kg, which would be sufficient
to hold the system.
When assembling the energy storage system on a wooden wall, it must be mounted on
non-flammable material! Construction panels made from calcium silicate are suitable for this
purpose, for instance.
Aerated concrete walls are generally unsuitable for attaching the energy storage system, for
example. In this case, the energy storage system must be installed on a base, as described in
the section about base assembly on page
18.
Table 6:
Anchor selection (extract from the Fischer "Anchor finder")
hager.com
Subject to technical changes
flow
Energy storage system
