hager WDI07 series, Руководство пользователя

Страница: 24 / 108

Dismantling the device
z
If a device is mounted flush with the wall, loosen it from its fastening in the
flush-mounted housing by applying even, slight pressure and release.
The device will move slowly forward out of the housing.
z
Loosen the screws and remove the device from the housing.
z
Remove connections.
6 Appendix
6.1 Technical data
Capacitive TFT touch display approx. 16:9
Storage temperature -20 … +60 °C
Air humidity 10 … 90 % at 25 °C, non-condensing
Degree of protection IP20
Cable cross-section of auxiliary voltage:
- flexible with conductor sleeve
max. 0.75 mm
2
- rigid max. 1.5 mm
2
Conformity according to EMC Directive 2004/108/EC
Voltage Directive 2006/95/EC
Standards EN 55022: 2010 Class B
EN 55024: 2010
EN 60950-1 : 2006 + A2: 2013
7´´Android variant:
Resolution 800 x 480 pixels
Light intensity 300 cd/m
2
Data transmission Ethernet 10/100 Mbit/s
Port Ethernet 1 x RJ45
Power supply via:
-PoE (Power over Ethernet) or
-Auxiliary voltage 18 … 48 V DC
Power consumption:
-PoE (visualisation only) max. 13 W
-with auxiliary voltage (audio-playback, door communication) max. 18 W
Processor 1 GHz CPU "DaVinci" DM3750 Coretex A8
Main memory 512 MB RAM
8 GB flash on SD card
z
24