Date : 20/09/2012
6T 8207-02a
tebis touch panel User Manual
USE
9
2. USE
2.1 Applications
The tebis touch panel is used to manage your electrical installation and its parameters are set according to your
application. The various functions described below may appear one or more times depending on the composition of
your home. Each device has a general representation, displayed on an overview, and a detailed representation allowing
more specific commands to be given.
2.1.1
Lighting
Is used to turn on, turn off and set the brightness of a light. The device, depending on the type chosen, may be
presented in 2 forms:
SIMPLE: This command is used to turn a light on and off. A
halo indicates the lighting status.
DIMMING: This command is used to turn on, turn off and
set the brightness of the light using a dimmer. Setting is
done in 3 different ways:
- By pressing the
and
symbols.
- By sliding your finger over the cursor.
- By clicking on the setting in steps symbols
(
25%,
50%,
75%,
100%).
A halo indicates the status of the lighting and the number
indicates the brightness.
OFF: This command is used only to turn off one or more
lighting units with a single touch.
2.1.2
Shutters and blinds
Is used to control shutters and blinds. The device, depending on the type chosen, may be presented in 4 forms:
SIMPLE SHUTTER: This command is used to open and
close the shutters. An additional command is used to stop
the upward or downward movement.
