hager S761-22, Руководство по установке, Страница: 99 / 104

99
Configuration
G
B
1) To start
the sequence,
press and hold
the key until
the LED goes out
2) Press the key
as many times
as the parameter
number
3) Press
and hold
the key until
the LED
goes out
4) Press the key
as many times as
the parameter value
5) To end
the sequence,
press and hold
the key until
the LED goes out
LED permanently
ON for 2 sec.
=
configuration correct
If you make a programming error, the programming LED will flash quickly. You must carry out the programming sequence again
from the start.
• Use the programming key to programme the following sequence:
configuration
sequence
LED
press key * Make a note
of the chosen
parameter
number/value
once and hold
(10 s approx.)
........ times* ........ times*
once and hold
(10 s approx.)
once
and hold
(5 s approx.)