100
Configuration
G
B
• Example of configuring the remote-controlled socket in Timer mode:
To change the remote-controlled socket configuration to Timer mode for a 15-minute duration, proceed as follows:
1) Start
3) Press once
to accept
selection
4) Press the key
5 times
to select
the 15 min. period
5) End
• Example of configuring the remote-controlled socket in Remote Control mode:
To change the remote-controlled socket configuration to Remote Control mode with activation of Light 1, proceed as follows:
If you make a programming error, the programming LED will flash quickly. You must carry out the programming sequence again
from the start.
1) Start
2) Press once
to select
the Remote Control
application
3) Press once
to accept
selection
5) End
2
5
1
2
2) Press twice
to select the Timer
application
4) Press twice
to select the Light 1
application