![background image](http://html1.mh-extra.com/html/hager/ee600/ee600_manual_3206033011.webp)
Luminosity
Sensitivity
(modification
of the range)
Fixed time
(length of time
of lighting)
Adjustments
Detection zones
Testing and validating
the detection zone
Put the potentiometer
2
on Test mode and
if necessary, use the shutters to define the
detection zone.
The Test mode is available for 3 min. Every
movement detected switches on the light for 1s.
After 3 min without detection of movement, the
product returns to normal operation.
“Normal” operation (on/off)
The light panel switches on when the luminosity
level defined by potentiometer
2
is judged to be
insufficient and when a movement is detected.
After detection, the light stays on for the length
of time predefined by the potentiometer
1
. The
fixed timing is reset after each detection.
Please note :
when the potentiometer
2
is on
“auto test”, the settings are predefined (See table
below).
ech30%
α
α
Optimal installation height is 2.5m.
The detection zone shall remain free of obstacle.
ech40%
vue 30-30°
cfg
fct
vue 30-30°
vue 30-30°
cfg
fct
a
b
c
8 m
12 m
Ø 6 m
2,5 m
8
z
Содержание EE600
Страница 2: ......
Страница 39: ...180 340 80 LED EE600 45 U 36 u...
Страница 40: ...N L Clac 1 2 3 4 322 mm 150 mm 180 mm 257 mm 37...
Страница 41: ...2 3 1 3 2 1 2 auto test 2 5 ech40 vue 30 30 vue 30 30 vue 30 30 a b c 8 m 12 m 6 m 2 5 m 38 u...