Adjust the door brackets to the desired height. Note - thee lower bracket has limited height adjustment. It should be
fixed in a position so that it does not clash with (L) or the cabinet edge. Once both door brackets have been set at an
appropriate heights firmly secure in place by tightening the 4 x M6 x 25 mm pozi screws.
Take measurements and transfer them to the back of the cabinet door. Pre-drill 5 mm pilot hole to a depth of 13 mm
being careful not to damage the front face of the door.
20
21
Fix the door
to the door brackets using 4 x euro screws
and adjust the door using tilt and alignment using 4 x M5 x 10 mm
screw. Further adjustment can be made by loosening the 4 x 25 x 10 mm pozi screws and repositioning the door
before re-tightening although care must be taken that the lower door bracket does not foul the cabinet side or the
swing bracket. For tilt adjustment loosen the euro screws slightly and then screw 4 x M5 x 10 mm screws into the
bracket to achieve the desired tilt alignment.
fixing hole
Tilt
fixing hole
Tilt
1
3
2
FITTING BASKETS
1.
Tilt the front of the basket upwards
by 45˚.
2.
Insert the pins on the basket into
the holes on the frame.
3.
Lower the front of the basket into
place (horizontal position).
Sales and Technical Support -
Tel: 0800 171 2908, Fax: 01788 544440, E-Mail: [email protected], www.hafele.co.uk
