PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition.
ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-2023
Insert the casters (F) in the legs of the
base (C) using pressure, then place the
gas lift (E) in the middle of the base and
cover it with (H) as shown.
Assemble the armrests (G) in the
respective sides of the backrest (A)
using screws (L) as shown.
Assemble the backrest (A) to the seat (B)
using screws (M) and washers (P), and
the armrests (G) to the seat using
screws (N) and washers (P) as shown.
Flip over the seat (B) with its front end
towards you, and using screws (K),
assemble the mechanism (D) with its
knob facing to the FRONT as shown.
Place the top parts over the base parts
making sure the tip of the gas lift enters
into the hole of the mechanism.
Before seating and using the chair for
the first time, make sure that all
screws are properly tightened.
5-Star base
Backrest
Armrests
Hydraulic
Gas Lift
Covers for
Gas Lift (Set)
Casters
F
x5
Seat
Headrest
M6x35mm
Headrest Cover
M6x20mm
(Mechanism)
E
x1
H
x1
G
D
x1
A
x1
B
x1
I
x1
J
x1
K
x4
L
x4
M
x4
M6x16mm
(Armrests to backrest)
ATTENTION:
• Follow the instructions step by step.
• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
• Using the wrong size of screws on a part could result in damage to the screw or the part
1
2
3
4
5
6
When you seat on the chair, not looking at it.
C
x1
Mechanism
x1 Left
x1 Right
(Backrest to seat)
M5x18mm
N
x6
O
x4
M6x25mm
(Armrests to seat)
(Headrest)
Allen Wrench M5
(
P
x10
Q
x1
Ø15xØ6x1.5mm
(Armrests)
C
E
H
F
B
K
D
G
(Right)
G
(Left)
A
L
(Backrest viewed from the
back and from underneath)
(Armrests viewed from underneath)
B
M+P
(for the back)
A
N+P
(for the arms)
G(R)
G(L)
Assemble the headrest (I) to the backrest
(A) using screws (O), then cover with (J)
as shown.
I
J
O
A
IDA-2023
