background image

CORAL BAY LOUVRE PANEL GAZEBO 

Assembly Instructions

Item Number: 0177358

Before installing please contact your local council for semi permanent structure requirements.

For permanent fixture contact your local council and use appropriate fixings.

This gazebo is a Semi-Permanent structure. Damage caused by extreme weather conditions including heavy rain or high winds is not

covered under warranty.

Please carefully read all instructions before assembly and use.

Please separate and identify all parts, ensuring that you have all parts listed.

To avoid damage to your gazebo, it is recommended that you assemble it on a clean, protected surface.

Washers must be used when indicated during the assembly process.

Loosely tighten the nuts and then securely tighten when all are in position. Be careful not to over tighten the nuts during assembly.

As an added precaution we strongly recommend you tighten any loose components after an initial period of use (around 3-6 months).

For assured longevity and safe use of your gazebo, we recommend regular checking and tightening of any bolts.

    

IMPORTANT SAFETY INSTRUCTIONS

The ground for erecting and anchoring the gazebo is required to be a level, solid and a safe surface.

Beware of existing utilities underground.

Keep away from any electrical installations and transportation devices.

Never climb, sit, or stand on the structure.

Please carefully read the below warnings and instructions. 

Save the instructions for future reference.

!

Summary of Contents for 0177358





















Reviews: