Fit the roller guide (Q) so that the rear frame sits vertically use the dimensions above.
Secure using 2 x 16mm, No.8 pozi countersunk screws.
18
Locate connecting rod (R) into holes on (L) and rear frame (N). Check that when the frame is pulled
outside the cabinet that the rear frame slides to an accessible position. If this is not the case then
check you have followed the previous assembly steps and dimensions correctly.
19
Check vertical then fix
400
305
420
Sales and Technical Support -
Tel: 0800 171 2908, Fax: 01788 544440, E-Mail: [email protected], www.hafele.co.uk
