732.28.424
HDE 26.07.21
7/12
en
3.1.2. 4-Channel Interface Standalone Mode with Multi-White Lights
To start, the 4-Channel Interface needs to contain a irmware version of at least 4.4.6 (otherwise please update)
and needs to be reset (status led blinks).
1. Start the search for mesh boxes by pressing the upper left and lower left buttons for 4 seconds. The led
will start blinking (slowly).
2.
Find and conigure Mesh Box: When the led starts to blink fast, a mesh device is found and will get
conigured.
3. To stop searching for new mesh boxes, press any button of the switch. To start searching again, continue
with step 1.
The buttons of the switch will control the mesh box in the following way:
•
First button: MW Light connected to port 1 and 2
•
Second button: MW Light connected to port 3 and 4
•
Third button: MW Light connected to port 5 and 6
•
Forth button: All lights connected
Controls are:
•
Single tap: On/Of
•
Long press: Dim up/down
•
Tap and long press: Temperature up/down
Group 3
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down
: Double Click
[Image 4]
Coniguration same like Connect Mesh Wall Switch
Group 1
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Group 2
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Group ALL
• ON/OFF:
Single Click
• Dim Up/Down:
Longpress
• Temp Up/Down:
Double Click
Constant Power
MW
Group 3
MW
Group 2
MW
Group 1
