732.28.424
HDE 26.07.21
5/12
en
2.5. Update Mode
In case the irmware is outdated, the user will be notiied in the Connect Mesh App. Then the user can start and perform
the irmware update of the mesh device. (more information in the speciic
Häfele Connect Mesh App
).
Option 1: Update via App
If the Mesh device is provisioned the update can be done by:
1.
Click on Mesh device and click on edit icon and scroll down to the bottom of the page. You can ind the
"Update Device icon".
2.
Click on this icon to update the Firmware.
Option 2: Manual Update via Power On/Of (Version 1 only)
1. Insert the battery to start the device and the LED will start blinking.
2. Remove the battery and insert it again.
Repeat this 4 times of consistent intervals of 2 seconds each .
3.
The irst group LED will start blinking faster to signify the device in Update Mode and can be updated using
the Häfele Connect Mesh App.
4. Press "Menu" icon, click on "Settings" and click on "Extended Settings" and then click on "Search device in
Update Modus". The mesh device will be displayed. Select Mesh device to start the Firmware Update.
Option 3: Manual Update via Reset Button (Version 2 only)
1. Press and hold the Reset Button on the Mesh device and at the same time, connect the Mesh Device into
Power supply. This will bring the Mesh device in OTA- Update mode.
2. Press "Menu" icon, click on "Settings" and click on " Extended Settings" and then click on "Search device
in Update Modus".
3.
The Mesh device will be displayed. Select Mesh device to start the Firmware Update
.
2.6. Reset
Option 1: Reset via App
If the Mesh device is provisioned and the reset can be done by:
1. Click on Mesh device and click on edit icon and scroll down to the bottom of the page.
2.
You can ind the "Delete Device" icon.
3. Click on this icon and select "Reset" option to reset the mesh device.
Option 2: Manual Reset by Power On/Of (Version 1 only)
1. Remove the battery and insert it again, while continuously pressing a button.
Repeat this 8 times at consistent intervals of 2 seconds.
2. The Mesh device will be reset and ready for Provisioning again.
Option 3: Manual Reset by Reset Button (Version 2 only)
1. Press the Reset button for at least 8 seconds and release it.
2. The Mesh device will be reset and ready for Provisioning again in the Häfele Connect Mesh App.
2.7. Status LED
Status LED Behaviour
Meaning
Of
The Connect Mesh 4-Channel Interface is either in normal operation mode or its
power is of. Waiting for 10 seconds and pressing a button will blink the status LED
once. In case this does not happen, the battery is empty.
Blinking
The Connect Mesh 4-Channel Interface is in provisioning mode and is ready to be
added to an existing Connect Mesh network.
Fast Blinking
The Connect Mesh 4-Channel Interface is in OTA update mode and is ready to be
updated. It will remain in OTA update mode for 60 seconds or until the power is
uninterrupted.
Double Blinking
(Attention Modus)
The Mesh App doesn't let the Battery-driven Mesh devices to activate the
energy-saving mode (Sleep-mode) and it helps to transmit the data
