732.28.424
HDE 26.07.21
4/12
en
2. Connect Mesh 4-Channel Interface
2.1. General Information:
The Connect Mesh 4-Channel Interface is an installation device which can be used to integrate existing wall
switches from other manufacturers that are already on site into your Bluetooth® Mesh Network.
[Image 1]
Connect Mesh 4-Channel Interface
Hardware Version 1 (Without Reset Button)
[Image 2]
Connect Mesh 4-Channel Interface
Hardware Version 2 (With Reset button)
With Bluetooth® Mesh, several Bluetooth® devices are combined to a meshed network. This means that each
device (node) in the network is connected to one or more devices and can communicate. Devices that belong to
a network work even if they are not in direct range of one another. It just has to be ensured that a member of the
network is within range to forward the data packages.
2.2. Setup
To use the Connect Mesh 4-Channel Interface, please insert a battery into the Battery Compartment. The device will
sleep initially and only wakes up by pressing one button. The status LED will lash to identify that the mesh Interface
is ready. Afterwards, it can be provisioned as described within the Connect Mesh App. After its initial provisioning,
the device will go to sleep 5 seconds after the last button interaction and wakes up by the next interaction.
2.3. Switching a group
The Connect Mesh 4-Channel Interface can be provisioned in the Connect Mesh App. After provisioning, you can
start coniguring the four physical buttons within the 4-Channel Interface settings. Possible coniguration in
4-Channel Interface are "Toggle On/Of", "Turn Group On", "Turn Group OFF", Scenes A,B,C or user-deined scene.
We recommend to use "Turn Group On" and "Turn Group OFF". For further details, please refer to Connect Mesh
App Operational Manual.
2.4. Dimming
To change the brightness, press the button which is connected to the group and hold it. The brightness of your lights
will increase until you release the press or the maximum brightness is reached. Repeat the long press will reduce the
brightness of the connected group.
Red wire - Live Wire (L)
Brown wire -Switch S4
Green wire - Switch S1
Blue wire - Switch S2
Yellow wire - Switch S3
Red wire - Live Wire (L)
Brown wire -Switch S4
Green wire - Switch S1
Blue wire - Switch S2
Yellow wire Switch S3
Reset Button
Status LED
