7
5. WHAT TO DO IF
Some of the problems can be caused by simple maintenance operations or
something that was forgotten and can easily be resolved without having to
call for technical assistance.
If your appliance is not working efficiently:
-
/CMGUWTGVJGICUEQEMKUQRGP
-
%JGEMVJCVVJGMPQDUCTGUGVEQTTGEVN[HQTEQQMKPICPFVJGPTGRGCVVJGQRGTCVKQPUIKXGPKP
the Instruction Manual.
-
%JGEMVJGGNGEVTKECNU[UVGOUCHGV[UYKVEJGU4%&+HVJGTGKUHCKNWTGKPVJGU[UVGOECNNCP
electrician.
6. INSTRUCTIONS FOR THE INSTALLER
TECHNICAL INFORMATION
- The installation, the adjustments, conversions and maintenance listed in this part must only
be carried out by qualified. The manufacturer cannot be held responsible for any damage to
persons or things deriving from an incorrect installation of the appliance.
- The safety and adjustment devices of the appliances may, during their life, only be modified by
the manufacturer or duly authorised supplier.
-
#NNICUCRRNKCPEGUECPDGKPUVCNNGFCU÷%NCUUøHKVVGFKPEQORNKCPEGYKVJICU5VCPFCTFUQPN[
-
#P[UKFGYCNNUQPGQPN[NGHVQTTKIJVVJCVQXGTEQOGKPJGKIJVVJGYQTMVQRJCXGVQDGOO
far at least.
- The adhesive used to join the laminated plastic to the piece of furniture must be able to with-
UVCPFCVGORGTCVWTGQHCVNGCUV
o
C, so the laminated plastic will not come unstuck.
- The installation of all-gas appliances must comply with the National Rules in force.
-
6JKUCRRNKCPEGKUPQVEQPPGEVGFVQCHNWGHQTFKUEJCTIGQHVJGEQODWUVKQPRTQFWEVUVJGTGHQTG
it must be connected in compliance with the above mentioned installation rules. Particular atten-
tion must be paid to the instructions given below for ventilation and aeration
Never clean when the top and components are still warm. Do not use metal or abrasive pads,
abrasive powders or corrosive spray
products. Never leave vinegar, coffee, milk, salty water, lemon or tomato juice for any length of
time on the surfaces.
WARNING:
(JJLZZPISLWHY[ZTH`ILOV[^OLU[OLWHUZ\WWVY[PZPU\ZL@V\UNJOPSKYLUZOV\SK
ILRLW[H^H`*VTWS`^P[O[OLMVSSV^PUNPUZ[Y\J[PVUZILMVYLYLTV\U[PUN[OLWHY[Z!
- Check that the heads burners and the relative burner caps, are correctly positioned in
their housings (see fig. 1).
- Check that burner head slots have not become clogged by foreign bodies.
- If to happened installation or after a few times, you find a tap is difficult to open or close
do not force it but call for technical assistance urgently.
- After use, to keep them in good condition, the plates should be treated with specific
products, easily found in the shops, to keep the surfaces clean and shining. This will also
prevent rust from forming.
- If any liquid spills over it must always be removed with a sponge.
