9
UNPACKING THE APPLIANCE
Once the outer wrapping and the inner wrappings of the various parts have been removed,
check and make sure that the appliance is in perfect condition. If you have any doubts do not
use the appliance and call your nearest Assistance Centre. Some parts are mounted on the
appliance and protected by a plastic film. This protective film must be removed before ever the
appliance is used. We recommend slitting the plastic film along the edges with a sharp knife or
pin
INSTALLING AND FIXING THE HOB
The measurements of the cavity made in the top of the modular cabinet and into which the hob
will be recessed are indicated in fig. 7. Cupboards or hoods have to maintain at least distance of
OOHTQOVJGVQR
The hob has a special seal which prevents liquid from infiltrating into the cabinet. Strictly comply
with the following instructions in order to correctly apply this seal:.
- Evenly and securely fix the seal to the hob, pressing it in place with the fingers.
- Remove the strip of protective paper from the seal, and set this onto the the glass edge
The packaging materials used (cardboard, bags, polystyrene foam, nails ...) should not be
left anywhere within easy reach of children as thev are a ootential hazard source.
Under the hob it is necessary to always apply a panel of separation in wood, positioned
VQCNGCUVFKUVCPEGQHOOD[VJGDQVVQOQHVJGUCOGYJKEJJCUVQGCUKN[DG
removable to allow possible operations of maintenance (see fig. 8 ).
