Hafco BS-13LS, Инструкция по эксплуатации

Страница: 7 / 34

5
F. SPECTIFIED USAGE:
This machine is used only for general metals cutting within the range of cutting capacity.
G. NOISE:
A weighted sound pressure level : 80 dB.
H. SAFETY DEVICE:
Interlock switch on cutting area as soon as the cover of cutting area is open, machine will stop at once witch
the function of this switch. Do not remove this switch from machine for any reason, and check its function
frequently.
3.SPECIFICATION
Spindle Motor 3HP 60HZ/50HZ 1720/1427 RPM
Coolant Pump Motor
1/8HP 60HZ/50HZ 2840/3440 RPM
Hydraulic Motor
1/4HP 60HZ/50HZ 1720/1420 RPM
Mt/min 60HZ 25-102 50HZ 30-123
Saw Blade Speed Variable Speed
Ft/min 60HZ 83-332 50HZ 100-400
Blade Size(mm/inch) 27 x 0.9 x 3810L / 1.06 x 0.035 x 150
Dimension L x W x H 2030 x 750 x 1280 mm
79.9 x 29.5 x 50.4 inch
N.W / G.W (kgs) 430 / 460
Measurement
2080 x 795 x 1370 mm
81.9 x 31.3 x 54 inch h
Packing
Sets per 20’ CTNR 7 sets
○(mm/inch)
330 mm / 13”
0
°
□(mm/inch)
305 mm x 305 mm / 12” x 12”
○(mm/inch)
305mm / 12”
Cutting
Capacity
45
°
□(mm/inch)
280 mm x 280 mm / 11 ”x 11”
4.FEARTURES:
1. This machine is useful for cutting normal steel, steel pipe, and provides cutting angle at 45
°
by the
swivel head.
2. A tooth selection label Ms provided on the machine for cutting reference.
3. Variable speed control gives convenient selection of speeds.
4. Hydraulic cylinder controls feeding volume and provides stable cutting.
5. Easy sliding the working table back and forth by loosing and fixing only two bolts.
6. Quick positioning vise for clamping all sizes of work piece.
7. Chip pan underneath the working table prevents coolant fluid leaking and keep floor dry.
8. Hydraulic unit is to rise up the saw arm automatically for easy handling.
9.Coolant for cutting , water : oil = 1:40 oil specification.
7 Instruction Manual for BS-13LS (B031) 30/03/2016