Caution
Sharp blades are fitted to the spindle of this machine and remain exposed until the blade
cover is fitted further in the assembly instructions.
Great care must be taken
Because of sharp edges
Fitting machine to stand
# Lift the main planner body onto the stand
With the infeed table to the right as shown)
Screw 3 x long studs up under the stand
with a washer
and tighten.
(2 at infeed table end, one at out feed
table end)
Bend up the
Chute top extension plate as far as you can into machine
base ( this will assist with dust extraction)
T
ighten all stand bolts
now.
# Fit the hand wheel onto the
out feed table screw on the
left hand side of the jointer
using
Socket head cap screw
Thread the handle into the block on the right hand side of
the jointer and lock in place with lock nut on thread
Page 8
