8
Fit rear table extension (560 x 600) to LH side
This is held on with 4 x socket head cap screws and can be adjusted up from any fall by screwing in
the 4 x lower cap screws as needed and hitting the table were it is bolted on with a soft hammer up
and down
Sit a straight edge across the main table and sliding table to get extension table were needed
Fit Rear table extension (500 x 900) to rear of main table
This is held on with 4 x socket head cap screws and can be adjusted up from any fall by screwing in
the 4 x lower cap screws as needed and hitting the table were it is bolted on with a soft hammer up
and down
Sit a straight edge across the main table and sliding table to get extension table were needed
